References

Below are reference materials to assist in getting materials approved and IDOT guidelines.

The following documents are provided as a tool to assist with identifying materials and/or ensuring that correct data is supplied to IDOT.

• Model Quality Control Plan for Concrete Production BMPR PCC04 Template
• PCC Mix Design Spreadsheet
  • PCC Mix Design (V2.6_CMMS)
  • Tutorial (V2.6_CMMS)
  • PCC Mix Design (V.X1.1)
  • Tutorial (V.X1.1)
  • Example PCC Mix Design
  • Allowable H20 (V2.4)
  • Blending Aggregrates (V2.5)
• PCC Mixer Performance Spreadsheet

The following documents are provided as a tool to assist with identifying materials and/or ensuring that correct data is supplied to IDOT.

• QMP Package Downloads

Stay Connected and subscribe for updates:

• Subscribe subscribe-dot-qcqaprogramupdates@lists.illinois.gov
• Unsubscribe unsubscribe-dot-qcqaprogramupdates@lists.illinois.gov

• Membrane Curing Compounds
  • Batch/Lot Number (explanation of manufacturer's batch/lot numbers)
  • Material Submittal

• Bureau of Local Roads Special Provisions
• Materials "M" Specifications
• To view the Standard Specifications please navigate to the Consultant Resources webpage.
• To view the Supplemental Specifications and Recurring Special Provisions please navigate to the Consultant Resources webpage.
• BDE Special Provisions
• Highway Standards

Activities involving materials, research, and new products are administered by IDOT's Central Bureau of Materials (CBM). Administration of these activities requires CBM to develop new specifications or revise existing department specifications. Since these activities are under development or are being evaluated, the specifications do not have a wide distribution. In addition, these specifications are a working document and have not been adopted as a statewide standard.

• Roller Compacted Concrete (CBM)
  Application: This specification states the requirements for constructing pavement, shoulder, base course, and base course widening using roller compacted concrete on prepared subgrade. Use of this special provision should be as part of the Bureau’s Experimental Feature Program; please contact Joe Vespa, Engineer of Technical and Product Studies, at Joseph.Vespa@illinois.gov for more information about the program.
  Effective Date: 01/17/14
  Revised Date: Not Applicable
  Contact Person: Daniel Tobias / Phone: 217/782-2912 / Email: Daniel.Tobias@Illinois.gov

• Manual for Materials Inspection
• Manual of Test Procedures for Materials (revised 12/1/21)
  • Addendum: ASTM D 2950 (Illinois Modified) (Revised 5/13/22)
  • Addendum: AASHTO M 323 (Illinois Modified) (Revised 5/13/22)
  • Addendum: Appendix B9 (Revised 5/13/22)
  • Addendum: Appendix E5 (Revised 5/13/22)
  • Addendum: Appendix E8 (Revised 5/13/22)
  • Addendum: AASHTO T 283 (Illinois Modified) (Revised 7/7/22)
• Manual of Test Procedures for Materials (revised 12/1/22)
• Manual of Test Procedures for Materials 2023 (revised 12/1/23)